top of page

One Large Garage Door or Two Smaller Doors? Planning Your Metal Garage

Writer: Ridgeline Structures
Ridgeline Structures
Oct 23
4 min read

Should your two-car metal garage have one large garage door or two smaller doors? One large door gives you a continuous entrance and more flexibility in how you pull in and use the space. Two smaller doors give each parking bay its own entrance and let you open one side while keeping the other closed.


The better choice depends on what you drive, how your driveway approaches the building, and whether the garage will also serve as a workshop or equipment shed. Here are the tradeoffs that matter.


Side-by-side comparison of The Tradesman metal garage with one wide closed black roll-up door on the left and two separate closed black roll-up doors on the right.

The Tradesman: one wide door on the left, two separate doors on the right. Illustrative layout comparison.


When one large garage door makes sense


A wide opening removes the divider between two vehicle entrances. That can be helpful if you want to pull a vehicle into the middle of the garage, bring equipment through the center, or change how you use the floor space over time.


Picture a garage that holds two vehicles during the week but becomes a workspace on Saturday. Once the vehicles are outside, a continuous entrance can make it easier to position a project in the middle and move tools or materials in and out.


It can also give a wider vehicle more room to line up at the entrance. The actual opening still needs to suit the vehicle, and a wide door cannot make up for a driveway that leaves too little room to turn.


The tradeoff is shared access: you open the same door for either vehicle, and a problem that prevents that door from opening can affect both parking spaces.


When two smaller garage doors make sense


Two doors work well when you want two defined parking bays. Each vehicle has its own entrance, and you can open one door while the other remains closed. That can be convenient when one side gets frequent use and the other holds a second vehicle, tools, or stored equipment.


Separate doors also give you an independent entrance if one door needs repair. That does not guarantee you can maneuver both vehicles through the working door, but you still have access to that bay.


The main limitation is the area between the openings. You have to line up with one entrance or the other. Two 10-foot-wide openings, for example, do not provide one continuous 20-foot-wide entrance.


Door width matters as much as door count. A truck with wide mirrors may be inconvenient to park through a narrow door even when there is plenty of room inside the building.


One large door vs. two smaller doors: a quick comparison


What matters most?

One large door

Two smaller doors

Entry and parking flexibility

A continuous opening lets you enter at different positions.

Each vehicle must line up with its own opening.

Using one bay at a time

The shared door opens for either parking space.

Open one door while the other stays closed.

Working in the center

No center divider interrupts the entrance.

The area between openings limits entry to the center.

Door maintenance

One door system to maintain.

Two independent door systems to maintain.

If one door needs repair

A problem can affect the shared vehicle entrance.

The other entrance can remain usable.

Price

Depends on door size, product, framing, and installation.

Depends on both door systems, framing, and installation.

Which arrangement costs less?


There is no reliable price rule based on door count alone. Two smaller doors mean two door assemblies and, if both will be powered, two compatible operators. A larger door may require a different product, framing, or installation arrangement. Those differences can change which option costs less.


For a useful comparison, ask for both layouts on the same building, with the door sizes, door type, operation, and installation responsibilities clearly stated. If one option includes doors installed with the building and another includes framed openings for a separate door installer, the totals are not yet comparable.


Our guide to comparing metal building quotes explains other details to check before choosing a proposal.


For a metal garage, door type matters too


A coiling roll-up door and a sectional overhead door use space differently. A coiling door wraps around a barrel above the opening. A typical sectional door travels on tracks and rests overhead inside the garage when open.


That distinction matters if you are planning lighting, overhead storage, or a vehicle lift. Both systems need installation space, but the location and amount depend on the selected product.


A double-width entrance may also call for a different door product or a separately installed door. Available widths, required spacing, and framing depend on the building and manufacturer. Ask about the actual options early, especially if a wide shared entrance is central to your plan.


Check the approach and the space around your vehicles


Before choosing a layout, measure the vehicles and equipment you actually plan to store. Include mirrors, racks, trailer fenders, and anything else that affects the width or height needed to enter.


Then consider three everyday situations:


  • Arriving while the other vehicle is already parked: can you line up with your entrance from the driveway?

  • Getting out after parking: is there room to open vehicle doors and walk past shelves or a workbench?

  • Taking out a mower or other equipment: can it reach an entrance without moving a vehicle first?


A garage can have doors large enough for both vehicles and still feel cramped once you add storage. If the layout only works with every shelf empty and every vehicle perfectly centered, consider more building width or a different storage arrangement.


A separate walk-in door is also worth considering for everyday access. You may only need to grab a tool or check on a project, rather than open a vehicle door.


Choose a layout around how you will use the garage


If your priority is a flexible entrance for changing parking positions, working in the center, or moving equipment, explore a large shared door. If you prefer dedicated parking bays and independent access, explore two smaller doors.


You do not need to arrive with finished plans. Tell us what you drive, what else will go inside, and how you expect to use the building. We can help you compare available layouts and explain what each option includes.


Start with our metal garage designs, or open the 3D building designer to explore your layout. Make changes, then save your design to get a quote.


Want help choosing door sizes or comparing arrangements? Request a metal building quote and tell us what needs to fit.

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page